PY60-A
CHT GAUGE
CHT GAUGE
The PY60-A works with both J and K type thermocouples to provide accurate monitoring of engine cylinder head or exhaust gas temperatures from -4 to 2012 F (-20 to 100 C). HIGH and LOW temperature alarms can be set from 32-2012 F (0-1100 C). When activated, the built-in 85dB alarm sounds, and the display will flash. The highest temperature seen is automatically saved to a non-volatile memory and can be displayed/reset at any time. Five levels of backlighting can be selected and all setup and calibration constants are saved to a non-volatile memory.
PY60-A CHT Specifications
Power Supply: 9.5 - 33.0 VDC, (.018 amp nominal)
Operating Temp: 32 - 122F (0-50C)
Size/ Weight: 2.475” square bezel, with standard aviation
2.250” raised round ring. Standard 2.625”
diameter mounting hole layout at 45 degrees.
Unique bezel design allows user either front
or rear mounting in your panel. Gauge depth
behind panel: surface mounted approx 2.60”,
rear mounted, approx. 2.90”. Weight
approx 2.3 oz.
Thermocouple: Type J or K
Measurement Range: -4 - 2012 F (-20-1100 C)
Accuracy: Better than +/- 1%, front panel adjustable
calibration
Alarms: HIGH and LOW temperature settable from 32- 2012 F (0-1100 C)
Display: 4 digit, Fahrenheit or Celsius. Five levels of
backlighting.
Output: Terminal B can be selected and used as an
External Alarm output if desired. For an CHT
high temp warning indicator light.
Power Supply: 9.5 - 33.0 VDC, (.018 amp nominal)
Operating Temp: 32 - 122F (0-50C)
Size/ Weight: 2.475” square bezel, with standard aviation
2.250” raised round ring. Standard 2.625”
diameter mounting hole layout at 45 degrees.
Unique bezel design allows user either front
or rear mounting in your panel. Gauge depth
behind panel: surface mounted approx 2.60”,
rear mounted, approx. 2.90”. Weight
approx 2.3 oz.
Thermocouple: Type J or K
Measurement Range: -4 - 2012 F (-20-1100 C)
Accuracy: Better than +/- 1%, front panel adjustable
calibration
Alarms: HIGH and LOW temperature settable from 32- 2012 F (0-1100 C)
Display: 4 digit, Fahrenheit or Celsius. Five levels of
backlighting.
Output: Terminal B can be selected and used as an
External Alarm output if desired. For an CHT
high temp warning indicator light.
AD-2000TK Type K Thermocouple