FUEL

F60-A
DIGITAL FUEL GAUGE

The F60-A DIGITAL FUEL GAUGE provides an accurate digital display of fuel remaining, trip fuel and total fuel used. Fuel remaining can be displayed up to 6550 liters or gallons, or as a percentage (0-100%) with user selectable display dampening to help prevent unwanted fluctuations in rough air. The F60-A is programmed for use with all known resistive American and European level senders made by VDO, Teleflex, Mercury, GM, Stewart-Warner, Centroid, Faria and others. LOW and HIGH fuel alarms can be set over the entire range. When activated, the built-in 85dB alarm will sound and the display will flash. Five different levels of internal backlighting can be selected, then all setup, alarm values, sender type and maximum tank capacity are saved to a nonvolatile memory. The External Alarm output on Terminal "C" can be programmed to activate an annunciator warning light, such as "LOW FUEL" or to control one of our ER-1A remote relays for the possible transferring of fuel from another tank. When the transfer mode is selected (tFEr), the pump will turn ON at the selected LOW alarm value, and OFF, when the fuel reaches the HIGH alarm setting. The gauge display will flash during the pump's operation.

Click for user Manual

F60-A SPECIFICATIONS:

Power Supply:              9.5-33.0 VDC (.018 amp nominal)

Operating Temp:          32-122F(0-50C)

Size/ Weight:                2.475" square, low profile...easily stackable bezel,
                                    with standard aviation 2.250" raised round ring.
                                    Standard 2.625" diameter mounting hole layout at
                                    45 degrees. Proprietary unique bezel design allows
                                    user the option of either front or rear mounting our
                                    gauges in their panel. Gauge depth behind panel:
                                    surface mounted approx. 2.60", rear mounted,
                                    approx. 2.90". Weight approx 2.3oz.

Accuracy:                     Limited only by sender accuracy.

Senders:                        Works with 0-30, 0-70, 0-90, 10-73, 10-180, 33-
                                     240, 40-250 ohm (and/or their inverse) level
                                     senders by VDO, Teleflex, GM, Stewart-Warner,
                                     Mercury, Faria,and others (both American and
                                     European). Capacitance (0-5V) are available for 0-                                     5V and 4-20mA senders.

Alarms:                         85dB internal LOW and HIGH level alarms,
                                     settable from 000.0 to 6553. External alarm output
                                     (5V,10mA(max)

Display:                         4 digits, Liters, Gallons, or %. 000.0 to 6553
                                      gallons or liters. Five levels of backlighting.

Output:                          Terminal C can be used as an External Alarm
                                      signal,(5V, 10mA) for a LED warning light... or
                                      as a control signal for an ER-1A relay and a
                                      possible fuel transfer pump.