HYDRAULIC PRESSURE

HY60-A
HYDRAULIC PRESSURE GAUGE

The HY60-A Hydraulic Pressure Gauge displays pressure in PSI or Bars. It has built-in calibration curves for most popular 4-20mA pressure senders/transducers manufactures by Ashcroft, Omega, Midas, Gems and others. The desired maximum pressure is easily selected from any one of the sixteen preset ranges, from 30PSI to 10,000PSI. LOW and HIGH pressure alarms can be set over the entire range of the instrument/sender. When activated, the HY60-A built-in 85dB alarm will sound and the display will flash. The alarms can be enabled or disabled with a single key press. Five levels of backlighting can be selected and then all set up, calibration constants, alarm values, and sender type/range are all saved to a nonvolatile memory. The HY60-A comes Factory preset to use Terminal C as an External Alarm output.

HY60-A
HYDRAULIC PRESSURE GAUGE
$229.95

HY-TDM2500
HYDRAULIC
PRESSURE
TRANSDUCER
$179.95

AM60-A   Hydraulic Pressure GaugeSpecifications

Power Supply:             9.5 - 33.0 VDC, (.018 amp nominal)

Operating Temp:         32 - 122F (0-50C)

Size/ Weight:               2.475” square bezel, with standard aviation 2.250” raised round ring.
                                       Standard 2.625” diameter mounting hole layout at 45 degrees. Unique
                                       bezel design allows user either front or rear mounting in your panel.
                                       Gauge depth behind panel: surface mounted approx 2.60”, rear mounted,
                                      approx. 2.90”. Weight approx 2.3 oz.

Accuracy:                     Better than 2%, front panel adjustable calibration.

Senders:                      Built-in calibration curves for 4-20mA pressure transducer by(Ashcroft,
                                       Omega, Midas, Gems, etc.) 16 selectable ranges from 30PSI to10,000PSI
                                       using the front panel keys.

Alarms:                         Accurate HIGH and LOW pressure alarms settable from 0-9999 PSI (0-680.0
                                        Bars).

Display:                         4 digits, PSI or Bars, Five levels of backlighting.

Output:                         Terminal C is Factory preset for use as an External Alarm signal (5V,10mA)