The T60-A Temperature Gauge displays water or engine oil temperature in either degrees F or C. It has built-in calibration curves for most popular senders manufactured by VDO, Teleflex, Stewart-Warner, and others. (senders available separately)  Sender type is selected with the front  panel keys.  LOW and HIGH temperature alarms can be set over the entire range of the instrument/sender.  When activated, the built-in 85dB alarm will sound and the display will flash. The alarm can be enabled or disabled with a single key press.  Five levels of backlighting can be selected.  Then all setup, calibration constants, alarm values, sender type and lighting level selected are saved to nonvolatile memory.  Terminal C can be programmed as an External Alarm output.  This could be used in conjunction with an ER-1A electronic relay to control optional equipment such as an electric radiator cooling fan, or to simply activate a warning/annunciator light on
 your panel.

T60-A  Temperature Gauge Specifications

Power Supply:              9.5 - 33.0 VDC, (.018 amp nominal)

Operating Temp:         32 - 122F (0-50C)

Size/ Weight:                2.475” square bezel, with standard aviation 2.250” raised round ring.
                                        Standard 2.625” diameter mounting hole layout at 45 degrees.  Unique
                                        bezel design allows user either front or rear mounting in your panel. 
                                        Gauge depth behind panel: surface mounted approx 2.60”, rear mounted,
                                        approx. 2.90”.  Weight approx 2.3 oz.

Accuracy:                     Better than +/-1 digit, front panel adjustable calibration.

Senders:                       Built-in calibration curves for most 15-250 ohm oil/water temperature
                                        senders such as VDO, Teleflex, Stewart-Warner, and others.

Alarms:                         LOW and HIGH alarms user settable from 32-300 F

Display:                         3 digit, degrees in Fahrenheit or Celsius,  Five levels of backlighting

Output:                          Terminal C is Factory preset, and can be used as an External Alarm signal to
                                        control an ER-1A or a panel warning light.