P60-AW
WATER PRESSURE GAUGE
WATER PRESSURE GAUGE
The P60-AW DIGITAL WATER PRESSURE GAUGE, can be used to display pressures in PSI or Bars. It has built-in calibration curves for most popular senders manufactured by VDO, Teleflex, and Stewart-Warner.(sender not included) The sender type is easily selected with the front panel keys. LOW and HIGH pressure alarms can be set over the entire range of the instrument/sender. When activated the P60-A built-in 85dB alarm will sound and the display will flash. The alarms can be enabled or disabled with a single key press. Five different levels of internal backlighting can be selected, and then all setup, calibrations, constants, alarm values, sender type, and lighting level are all saved to a nonvolatile memory. Terminal "C" comes Factory preset to use as an External Alarm signal. This 5V,10mA signal voltage could be used in conjunction with the optional ER-1A electronic relay to control a backup/secondary piece of equipment (elecrtic water pump / fuel pump) or simply used to illuminate a panel warning light. NOTE: Alarm functions must be activated or enabled to utilize them.
P60-AW
WATER PRESSURE
GAUGE
149.95
P60-A SPECIFICATIONS
Power: 9.5-33.0 VDC,
Operating Temps: 32-122F (0-50C),
Size: 2.475" square, low profile...easily stackable bezel, with aviation standard
2.250" raised round ring area. Aviation standard 2.625" diameter mounting
hole layout at 45 degrees. Our proprietary unique bezel design allows user
the option of either FRONT or REAR mounting of the gauge(s) in your
panel. GAUGE DEPTH BEHIND PANEL: Surface mounted, approx. 2.60",
rear mounted, approx. 2.90". WEIGHT: approx. 2.3 oz.
Accuracy: Better than 1%, front panel key adjustable calibration.
Senders: Built-in calibration curves for most 10/20 - 180/250 ohm pressure
senders, such as those from VDO, Teleflex, and Stewart-Warner.
Alarms: Accurate LOW and HIGH pressure alarm limits, settable from 0-400 PSI
(0-27.5 Bars).
Display: 4 digits, PSI or Bars. Five different levels of internal backlighting.
Output: Terminal "C" is Factory preset for use as an External Alarm signal
(5V,10mA)
Power: 9.5-33.0 VDC,
Operating Temps: 32-122F (0-50C),
Size: 2.475" square, low profile...easily stackable bezel, with aviation standard
2.250" raised round ring area. Aviation standard 2.625" diameter mounting
hole layout at 45 degrees. Our proprietary unique bezel design allows user
the option of either FRONT or REAR mounting of the gauge(s) in your
panel. GAUGE DEPTH BEHIND PANEL: Surface mounted, approx. 2.60",
rear mounted, approx. 2.90". WEIGHT: approx. 2.3 oz.
Accuracy: Better than 1%, front panel key adjustable calibration.
Senders: Built-in calibration curves for most 10/20 - 180/250 ohm pressure
senders, such as those from VDO, Teleflex, and Stewart-Warner.
Alarms: Accurate LOW and HIGH pressure alarm limits, settable from 0-400 PSI
(0-27.5 Bars).
Display: 4 digits, PSI or Bars. Five different levels of internal backlighting.
Output: Terminal "C" is Factory preset for use as an External Alarm signal
(5V,10mA)