T60-A
TEMPERATURE GAUGE

The T60-A DIGITAL TEMPERATURE GAUGE provides an accurate digital display for Engine Oil(AO), Drive Oil(ADO), or Engine Water(AW) TEMPERATURES in either degrees F or C. It has built-in calibration curves for most popular senders manufactured by VDO, Teleflex, Stewart-Warner, and others(senders not included). Sender type is easily selected using the front panel keys. LOW and HIGH temperature alarm limits can be set over the entire range of the instrument/sender. When activated, the built-in 85dB alarm will sound and the display will flash. The alarm can be enabled or disabled with a single key press. Five different levels of internal backlighting can be selected. Then all setup, calibrations, constants, alarm values, sender type, and lighting level selected are all saved to a nonvolatile memory. Terminal "C" can be programmed as an External Alarm output. This could be used in conjunction with the ER-1A electronic relay (see ACCESSORIES) to control optional related equipment, such as an electric radiator cooling fan, or to simply activate a warning/annunciator light on your panel.



T60-A
TEMPERATURE GAUGE
149.95

T60-A Specifications

Power Supply: 
            9.5-33.0 VDC (.018 amp nominal)

Operating Temp:         32-122F (0-50C)

Size/ Weight:              
2.475" square, low profile....easily stackable bezel, with aviation 
                                    standard  2.250" raised round ring area. Aviation standard 2.625"  
                                    diameter mounting hole layout, at 45 degrees. Our proprietary unique
                                    bezel design allows user the option of either front or rear mounting of
                                    the gauge in your panel. Gauge depth behind panel: Surface mounted,
                                    approx. 2.60", REAR mounted, approx. 2.90".


Accuracy:                    Better than +/- 1%, front panel adjustable calibration.

Senders:                     
Built-in calibration curves for most 15-250 ohm oil/water temperature
                                   senders, as those from VDO, Teleflex, Stewart-Warner, and others.


Alarms:                       LOW and HIGH user settable temperature alarm limits from 32-300F.

Display:                      
3 digit, degrees in Fahrenheit or Celsius, Five different user selectable
                                   levels of internal backlighting.

Output:                        Terminal "C" is Factory preset, and can be used as an External 
                                   Alarm signal.